S-7 Reusable Concrete Anchor Data
S-7 Reusable Concrete Anchor
| Diameter & Threads per Inch |
Ultimate Strength Inner Stud (fu) |
Ultimate Strength Outer Stud (fu) |
Nominal Shear Strength of Outer Thread (Vsa) |
Torque Ft-Lbs | Minimum Embedment (3000 PSI – f’c) |
Minimum Embedment (6500 PSI – f’c) |
Cone & Shell Length (B) |
Exterior Thread Length (C) |
Part Number |
|
|---|---|---|---|---|---|---|---|---|---|---|
| To Expand Shell |
On Nut for Tension |
|||||||||
| 1/2” – 13 (13 mm) |
6.28 kips (28.0 kN) |
9.9 kips (44 kN) |
5.96 kips (26.5 kN) |
15 | 30 | 4-1/2” (114 mm) |
3-1/2” (89 mm) |
1-1/4” (32 mm) |
1-1/2” (38 mm) |
S7T-04 |
| 3/4” – 10 (19 mm) |
17.0 kips (75.7 kN) |
23.4 kips (104 kN) |
14 kips (62.3 kN) |
70 | 100 | 7-3/4” (197 mm) |
6” (153 mm) |
1-3/4” (45 mm) |
1-7/8” (48 mm) |
S7T-06 |
| 1” – 8 (25 mm) |
27.1 kips (121 kN) |
42.4 kips (189 kN) |
25.4 kips (113 kN) |
85 | 200 | 8-1/2” (216 mm) |
6-1/2” (165 mm) |
2-9/16” (65 mm) |
2-1/2” (64 mm) |
S7T-08 |
| 1-1/4” – 7 (32 mm) |
27.1 kips (121 kN) |
67.8 kips (302 kN) |
40.7 kips (181 kN) |
125 | 240 | 8-1/2” (216 mm) |
6-1/2” (165 mm) |
3-1/4” (83 mm) |
3-1/4” (83 mm) |
S7T-10 |
| 1-3/4” – 5 (45 mm) |
72.7 kips (323 kN) |
133 kips (592 kN) |
79.8 kips (355 kN) |
500 | 900 | 16-1/2” (419 mm) |
12-3/4” (324 mm) |
6-1/4” (159 mm) |
4” (102 mm) |
S7T-14 |
| 2” – 6 (51 mm) |
102 kips (454 kN) |
175 kips (778 kN) |
105 kips (467 kN) |
500 | 1,500 | 20-1/2” (521 mm) |
16” (406 mm) |
6-3/4” (171 mm) |
4” (102 mm) |
S7T-16 |
- Minimum embedment depths reflect values for ductile steel failure of the anchor in accordance with ACI 318 for 3000 and 6500 PSI concrete, respectively.
- Use the lesser strength of the outer or inner stud capacity for anchor structural capacity in design.
- For Type C anchor applications, please contact your Williams representative to determine the capacity of the cable hole.
Type “B” S-7 Anchor
Shear through hex headed Grade 8 bolt
| Diameter & Threads per Inch |
Average Unfactored Ultimate Strength Grade 8 Bolt (fu) |
Nominal Shear Strength of Grade 8 Bolt (Vsa) |
|---|---|---|
| 5/16” – 18 (8 mm) |
6.55 kips (29 kN) |
3.93 kips (17.5 kN) |
| 1/2” – 13 (13 mm) |
17.7 kips (78.7 kN) |
10.6 kips (47 kN) |
| 5/8” – 11 (16 mm) |
28.3 kips (126 kN) |
17 kips (75.6 kN) |
| 1” – 8 (25 mm) |
75.8 kips (337 kN) |
45.5 kips (202 kN) |
| 1-1/4” – 7 (32 mm) |
121 kips (538 kN) |
72.6 kips (323 kN) |
C2T Stop-Type Couplings & C2D Flange Couplings
| Bar Diameter |
Outside Diameter |
Overall Length |
Stop-Type Part Number |
Flange Coupling | |
|---|---|---|---|---|---|
| Flange Size | Part Number | ||||
| 1/2” (13 mm) |
3/4” (19 mm) |
1-1/2” (38 mm) |
C2T-04 | 2” x 2” (51 x 51 mm) |
C2D-04 |
| 3/4” (19 mm) |
1-1/8” (29 mm) |
2” (51 mm) |
C2T-06 | 2” x 2” (51 x 51 mm) |
C2D-06 |
| 1” (25 mm) |
1-1/2” (38 mm) |
3” (76 mm) |
C2T-08 | 3” x 3” (76 x 76 mm) |
C2D-08 |
| 1-1/4” (32 mm) |
1-7/8” (48 mm) |
3-3/4” (95 mm) |
C2T-10 | 3” x 3” (76 x 76 mm) |
C2D-10 |
| 1-3/4” (45 mm) |
2-1/2” (64 mm) |
5-1/2” (140 mm) |
C2T-14 | 4” x 4” (102 x 102 mm) |
C2D-14 |
| 2” (51 mm) |
3” (76 mm) |
6” (152 mm) |
C2T-16 | – | – |
H1F Heavy Duty Hex Nuts
| Bar Diameter |
Across Flats |
Across Corners |
Thickness | Part Number |
|---|---|---|---|---|
| 1/2” (13 mm) |
7/8” (22 mm) |
1.0” (26 mm) |
31/64” (12 mm) |
H1F-04 |
| 3/4” (19 mm) |
1-1/4” (32 mm) |
1.4” (37 mm) |
47/64” (19 mm) |
H1F-06 |
| 1” (25 mm) |
1-5/8” (41 mm) |
1.9” (48 mm) |
63/64” (25 mm) |
H1F-08 |
| 1-1/4” (32 mm) |
2” (51 mm) |
2.3” (59 mm) |
1-7/32” (31 mm) |
H1F-10 |
| 1-3/4” (43 mm) |
2-3/4” (70 mm) |
3.18” (81 mm) |
1-23/32” (44 mm) |
H1F-14 |
| 2” (51 mm) |
3-1/8” (79 mm) |
3.6” (92 mm) |
1-31/32” (50 mm) |
H1F-16 |
R9F Hardened Washers
| Bar Diameter |
Outside Diameter |
Inside Diameter |
Thickness | Part Number |
|---|---|---|---|---|
| 1/2” (13 mm) |
1-1/16” (27 mm) |
17/32” (14 mm) |
9/64” (3.56 mm) |
R9F-04-436 |
| 3/4” (19 mm) |
1-7/16” (37 mm) |
13/16” (21 mm) |
9/64” (3.6 mm) |
R9F-06-436 |
| 1” (25 mm) |
2” (51 mm) |
1-1/16” (29 mm) |
5/32” (4 mm) |
R9F-08-436 |
| 1-1/4” (32 mm) |
2-1/2” (64 mm) |
1-3/8” (35 mm) |
5/32” (4 mm) |
R9F-10-436 |
| 1-3/4” (43 mm) |
3-3/8” (86 mm) |
1-7/8” (48 mm) |
7/32” (5.6 mm) |
R9F-14-436 |
| 2” (51 mm) |
3-3/4” (95 mm) |
2-1/8” (54 mm) |
7/32” (5.6 mm) |
R9F-16-436 |
R8M Beveled Washers
| Bar Diameter |
Degree of Bevel |
Outside Diameter |
Inside Diameter |
Maximum Thickness |
Minimum Thickness |
Part Number |
|---|---|---|---|---|---|---|
| 1/2” (13 mm) |
14° | 1-1/4” (32 mm) |
9/16” (14 mm) |
7/16” (11 mm) |
1/8” (3 mm) |
R8M-04 |
| 3/4” (19 mm) |
11° | 1-9/16” (40 mm) |
13/16” (21 mm) |
1/2” (13 mm) |
3/16” (5 mm) |
R8M-06 |
| 1” (25 mm) |
15° | 2-1/16” (52 mm) |
1” (25 mm) |
3/4” (19 mm) |
1/4” (6 mm) |
R8M-08S |
| 1-1/4” (32 mm) |
15° | 3-3/8” (86 mm) |
1-9/16” (40mm) |
1-15/64” (31 mm) |
3/8” (9.5 mm) |
R8M-12S |
| 1-3/4” (43 mm) |
5° | 3-9/16” (91 mm) |
2-1/16” (52 mm) |
13/16” (21 mm) |
1/2” (13 mm) |
R8M-16 |
| 2” (51 mm) |
5° | 3-9/16” (91 mm) |
2-1/16” (52 mm) |
13/16” (21 mm) |
1/2” (13 mm) |
R8M-16 |
To achieve full strength of the nut, beveled washers must be used in conjunction with a hardened washer.
