|
|
|
Grout Bonded (Multiple Corrosion Protection)
Rock & Soil Anchor System Accessories
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
150 KSI All-Thread-Bar - ASTM A722 |
|
|
 |
|
|
R71 150 KSI All-Thread-Bar - ASTM A722
Nominal
Bar
Diameter
|
Minimum
Net Area
Thru Threads
|
Minimum
Ultimate
Strength
|
Minimum
Yield
Strength
|
Nominal
Weight
|
Approx.
Thread
Major Dia. |
Part
Number
|
1"
(25 mm)
|
0.85 in2
(549 mm2)
|
128 kips
(567 kN) |
102 kips
(454 kN) |
3.09 lbs./ft.
(4.6 Kg/M)
|
1-1/8"
(28.6 mm) |
R71-08
|
1-1/4"
(32 mm)
|
1.25 in2
(807 mm2)
|
188 kips
(834 kN)
|
150 kips
(667 kN)
|
4.51 lbs./ft.
(6.71 Kg/M)
|
1-7/16"
(36.5 mm) |
R71-10
|
1-3/8"
(36 mm)
|
1.58 in2
(1019 mm2)
|
237 kips
(1054 kN)
|
190 kips
(843 kN)
|
5.71 lbs./ft.
(8.50 Kg/M)
|
1-9/16"
(39.7 mm) |
R71-11
|
1-3/4"
(45 mm)
|
2.60 in2
(1664 mm2)
|
400 kips
(1779 kN)
|
320 kips
(1423 kN)
|
9.06 lbs./ft.
(13.5 Kg/M) |
2"
(50.8 mm) |
R71-14
|
2-1/2"
(65 mm) |
5.19 in2
(3350 mm2) |
778 kips
(3457 kN)
|
622 kips
(2766 kN)
|
18.20 lbs./ft.
(27.1 Kg/M)
|
2-3/4"
(69.9 mm) |
R71-20 |
** 3"
(75 mm) |
6.46 in2
(4169 mm2) |
969 kips
(4311 kN)
|
775 kips
(3448 kN)
|
22.3 lbs./ft.
(32.7 Kg/M)
|
3-3/64"
(78.2 mm) |
R71-24 |
** The 3" diameter bar is not covered under ASTM A722.
|
|
|
|
|
|
|
|
Grade 75 All-Thead Rebar - ASTM A615 |
|
|
|
 |
|
|
|
R61 Grade 75 All-Thead Rebar - ASTM A615
Bar Desig. &
Nominal Dia. |
Minimum
Net Area
Thru Threads |
Minimum
Ultimate
Strength |
Minimum
Yield
Strength |
Nominal
Weight |
Approx.
Thread
Major Dia. |
Part Number |
#6 - 3/4"
(20 mm) |
0.44 in2
(284 mm2) |
44 kips
(196 kN) |
33 kips
(147 kN) |
1.5 lbs./ft.
(2.36 Kg/M) |
7/8"
(22.2 mm) |
R61-06 |
#7 - 7/8"
(22 mm) |
0.60 in2
(387 mm2) |
60 kips
(267 kN) |
45 kips
(200 kN)
|
2.0 lbs./ft.
(3.04 Kg/M) |
1"
(25.4 mm) |
R61-07 |
#8 - 1"
(25 mm) |
0.79 in2
(510 mm2) |
79 kips
(351 kN) |
59.3 kips
(264 kN) |
2.7 lbs./ft.
(3.94 Kg/M) |
1-1/8"
(28.6 mm) |
R61-08 |
#9 - 1-1/8"
(28 mm) |
1.00 in2
(645 mm2) |
100 kips
(445 kN) |
75 kips
(334 kN) |
3.4 lbs./ft.
(5.06 Kg/M) |
1-1/4"
(31.8 mm) |
R61-09 |
#10 - 1-1/4"
(32 mm) |
1.27 in2
(819 mm2) |
127 kips
(565 kN) |
95.3 kips
(424 kN) |
4.3 lbs./ft.
(5.50 Kg/M) |
1-3/8"
(34.9 mm) |
R61-10 |
#11 - 1-3/8"
(35 mm) |
1.56 in2
(1006 mm2) |
156 kips
(694 kN) |
117 kips
(521 kN) |
5.3 lbs./ft.
(7.85 Kg/M) |
1-1/2"
(38.1 mm) |
R61-11 |
#14 - 1-3/4"
(45 mm) |
2.25 in2
(1452 mm2) |
225 kips
(1001 kN) |
168.7 kips
(750 kN) |
7.65 lbs./ft.
(11.8 Kg/M) |
1-7/8"
(47.6 mm) |
R61-14 |
#18 - 2-1/4"
(55 mm) |
4.00 in2
(2581 mm2) |
400 kips
(1779 kN) |
300 kips
(1335 kN) |
13.6 lbs./ft.
(19.6 Kg/M)
|
2-7/16"
(61.9 mm) |
R61-18 |
#20 - 2-1/2"
(64 mm) |
4.91 in2
(3168 mm2) |
491 kips
(2184 kN) |
368 kips
(1637 kN) |
16.7 lbs./ft.
(24.8 Kg/M) |
2-3/4"
(69.9 mm) |
R61-20 |
#28 - 3-1/2"
(89 mm) |
9.61 in2
(6200 mm2)
|
960 kips
(4274 kN)
|
720 kips
(3206 kN) |
32.7 lbs./ft.
(48.6 Kg/M)
|
3-3/4"
(95.0 mm)
|
R61-28
|
More detailed information on Williams Grade 75 All-Thead Rebar
|
|
|
|
|
|
|
|
Stop-Type Couplings |
|
|
|
 |
R62 Stop-Type Coupling
for Grade 75 All-Thread Rebar
ASTM A108
Nominal
Bar
Diameter |
Outside
Diameter |
Overall
Length |
Part
Number
|
#6 - 3/4"
(20 mm) |
1-1/4"
(31.8 mm) |
3-1/2"
(88.9 mm) |
R62-06 |
#7 - 7/8"
(22 mm) |
1-3/8"
(35.1 mm)
|
4"
(102 mm)
|
R62-07
|
#8 - 1"
(25 mm) |
1-5/8"
(41.4 mm)
|
4-1/2"
(114 mm)
|
R62-08
|
#9 - 1-1/8"
(28 mm) |
1-7/8"
(47.7 mm)
|
5"
(127 mm)
|
R62-09
|
#10 - 1-1/4"
(32 mm) |
2"
(50.8 mm)
|
5-1/2"
(140 mm)
|
R62-10
|
#11 - 1-3/8"
(35 mm) |
2-1/4"
(57.2 mm)
|
6"
(152 mm)
|
R62-11
|
#14 - 1-3/4"
(45 mm) |
2-7/8"
(73.0 mm)
|
7-7/8"
(200 mm)
|
R62-14
|
#18 - 2-1/4"
(55 mm) |
3-1/2"
(88.9 mm)
|
9-1/8"
(233 mm)
|
R62-18
|
#20 - 2-1/2"
(64 mm) |
4"
(102 mm)
|
9-1/2"
(241 mm)
|
R62-20
|
#28 - 3-1/2"
(89 mm) |
5-1/2"
(140 mm)
|
12"
(305 mm)
|
R62-28
|
|
R72 Stop-Type Coupling
for 150 KSI All-Thread-Bar
ASTM A29, Grade C1045
Nominal
Bar
Diameter |
Outside
Diameter |
Overall
Length |
Part
Number
|
1"
(25 mm) |
1-3/4"
(45 mm) |
4-1/4"
(108 mm) |
R72-08
|
1-1/4"
(32 mm) |
2-1/8"
(54 mm) |
5-1/4"
(133 mm) |
R72-10
|
1-3/8"
(36 mm) |
2-3/8"
(60 mm) |
5-3/4"
(146 mm) |
R72-11
|
1-3/4"
(46 mm) |
3"
(76 mm) |
8-1/2"
(216 mm) |
R72-14
|
2-1/2"
(65 mm) |
4-1/4"
(108 mm) |
9-3/8"
(238 mm) |
R72-20
|
3"
(75 mm) |
5"
(127 mm) |
11-7/8"
(302 mm) |
R72-24
|
|
|
|
|
|
|
|
|
|
Hex Nuts |
|
|
|
 |
R63 Hex Nut
for Grade 75 All-Thread Rebar
ASTM A108
Nominal
Bar
Diameter
|
Across
Flats |
Thickness
|
Part
Number
|
#6 - 3/4"
(20 mm) |
1-1/4"
(31.8 mm) |
1-5/8"
(41.4 mm) |
R63-06 |
#7 - 7/8"
(22 mm) |
1-7/16"
(36.5 mm)
|
1-3/4"
(44.5 mm)
|
R63-07
|
#8 - 1"
(25 mm) |
1-5/8"
(41.3 mm)
|
2"
(50.8 mm)
|
R63-08
|
#9 - 1-1/8"
(28 mm) |
1-7/8"
(47.8 mm)
|
2"
(55.5 mm)
|
R63-09
|
#10 - 1-1/4"
(32 mm) |
2"
(50.8 mm)
|
2-3/16"
(55.6 mm)
|
R63-10
|
#11 - 1-3/8"
(35 mm) |
2-1/4"
(57.2 mm)
|
2-13/32"
(61.1 mm)
|
R63-11
|
#14 - 1-3/4"
(45 mm) |
2-3/4"
(69.9 mm)
|
3-1/4"
(82.6 mm)
|
R63-14
|
#18 - 2-1/4"
(55 mm) |
3-1/2"
(88.9 mm)
|
3-1/2"
(88.9 mm)
|
R63-18
|
#20 - 2-1/2"
(64 mm) |
4"
(102 mm)
|
4"
(102 mm)
|
R63-20
|
* #28 - 3-1/2"
(89 mm) |
5-1/2"
(140 mm)
|
6"
(142 mm)
|
R64-28
|
** Round nut with outside diameter of 6" (152 mm) |
R73 Hex Nut
for 150 KSI All-Thread-Bar
ASTM A29
Nominal
Bar
Diameter
|
Across
Flats |
Thickness
|
Part
Number
|
1"
(25 mm)
|
1-3/4"
(45 mm) |
2"
(51 mm)
|
R73-08
|
1-1/4"
(32 mm)
|
2-1/4"
(57 mm) |
2-1/2"
(64 mm)
|
R73-10
|
1-3/8"
(36 mm)
|
2-1/2"
(64 mm) |
2-3/4"
(70 mm)
|
R73-11
|
1-3/4"
(45 mm)
|
3"
(76 mm) |
3-1/2"
(89 mm)
|
R73-14
|
2-1/2"
(65 mm) |
4-1/4"
(108 mm) |
4-3/4"
(120 mm)
|
R73-20
|
** 3"
(75 mm) |
4-1/4"
(108 mm) |
6-1/8"
(156 mm)
|
R74-24
|
** Round nut with outside diameter of 5" (127 mm) |
|
|
|
|
|
|
|
|
Spherical Hex Nuts & Washers |
|
|
|
|
Provides up to 5° angle when used with a dished plate.
|
 |
 |
R81 Spherical Washer
for Grade 75 All-Thread Rebar
ASTM A536
Nominal
Bar
Diameter
|
Thickness |
Outside
Dome |
Part
Number |
#6 - 3/4"
(20 mm) |
35/64”
(13.9 mm) |
2"
(51 mm) |
R81-0675 |
#7 - 7/8"
(22 mm) |
39/64”
(15.5 mm)
|
2-1/4"
(57 mm)
|
R81-0775 |
#8 - 1"
(25 mm) |
5/8”
(15.9 mm)
|
2-1/2"
(64 mm)
|
R81-0875 |
#9 - 1-1/8"
(28 mm) |
3/4”
(19.1 mm)
|
2-3/4"
(70 mm)
|
R81-0975 |
#10 - 1-1/4"
(32 mm) |
53/64”
(21.0 mm)
|
3-1/8"
(79.4 mm)
|
R81-1075 |
#11 - 1-3/8"
(35 mm) |
29/32”
(23.0 mm)
|
3-1/8"
(79.4 mm)
|
R81-1175 |
#14 - 1-3/4"
(45 mm) |
1-7/64”
(28.2 mm)
|
4"
(102 mm)
|
R81-1475 |
#18 - 2-1/4"
(55 mm) |
1-13/32”
(35.7 mm)
|
5"
(127 mm)
|
R81-1875 |
#20 - 2-1/2"
(64 mm) |
1-1/2”
(38.1 mm)
|
5-1/4"
(133 mm)
|
R81-2075 |
#28 - 3-1/2"
(89 mm) |
1-1/2”
(38.1 mm)
|
7"
(178 mm)
|
R81-2875 |
|
R88 Spherical Hex Nut
for 150 KSI All-Thread-Bar
ASTM A536
Nominal
Bar
Diameter
|
Across
Flats |
Thickness |
Outside
Dome |
Part
Number |
1"
(25 mm)
|
1-3/4"
(45 mm) |
2-1/4"
(57 mm) |
2-1/2"
(64 mm) |
R88-08 |
1-1/4"
(32 mm)
|
2-1/4"
(57 mm) |
2-3/4"
(70 mm) |
3-1/8"
(81 mm) |
R88-10 |
1-3/8"
(36 mm)
|
2-1/2"
(64 mm) |
3-1/4"
(83 mm) |
3-5/8"
(92 mm) |
R88-11 |
1-3/4"
(46 mm)
|
3"
(76 mm) |
3-1/2"
(89 mm) |
4"
(101 mm) |
R88-14 |
* 2-1/2"
(65 mm)
|
4-1/4"
(108 mm) |
4-3/4"
(120 mm) |
6"
(152 mm) |
R73-20
R81-20 |
** 3"
(75 mm) |
4-1/4"
(108 mm) |
8-1/8"
(206 mm) |
7"
(178 mm) |
R74-24
R81-24 |
*Requires a standard nut with spherical washer.
**Requires a standard nut with spherical washer. Round nut with outside diameter of 5" (127 mm)
|
|
|
|
|
|
|
|
|
Jam Nuts |
|
|
|
|
These Jam Nuts can't be substituted for full strength nuts and can only be used on their respective bars for the exact diameter listed.
|
 |
R73-JN Jam Nuts
for Grade 75 All-Thread Rebar
ASTM A108
Nominal
Bar
Diameter
|
Across
Flats |
Overall
Length |
Part
Number |
#6 - 3/4"
(20 mm) |
1-1/4"
(32 mm) |
13/16"
(20.6 mm) |
R63-06JN |
#7 - 7/8"
(22 mm) |
1-7/16"
(36.5 mm)
|
7/8"
(22.2 mm)
|
R63-07JN
|
#8 - 1"
(25 mm) |
1-5/8"
(41 mm)
|
1"
(25 mm)
|
R63-08JN
|
#9 - 1-1/8"
(28 mm) |
1-7/8"
(47.6 mm)
|
1"
(25 mm)
|
R63-09JN
|
#10 - 1-1/4"
(32 mm) |
2"
(51 mm)
|
1-3/16"
(27.7 mm)
|
R63-10JN
|
#11 - 1-3/8"
(35 mm) |
2-1/4"
(57 mm)
|
1-1/4"
(31.8 mm)
|
R63-11JN
|
#14 - 1-3/4"
(45 mm) |
2-3/4"
(70 mm)
|
1-5/8"
(41.3 mm)
|
R63-14JN
|
#18 - 2-1/4"
(55 mm) |
3-1/2"
(89 mm)
|
1-3/4"
(44.5 mm)
|
R63-18JN
|
#20 - 2-1/2"
(64 mm) |
4"
(102 mm)
|
2"
(50.8 mm)
|
R63-20JN
|
#28 - 3-1/2" *
(89 mm) |
5-1/2"
(140 mm)
|
2-1/2"
(63.5 mm)
|
R64-28JN
|
|
R73-JN Jam Nuts
for 150 KSI All-Thread-Bar
ASTM A29
Nominal
Bar
Diameter
|
Across
Flats |
Overall
Length |
Part
Number |
1"
(26 mm)
|
1-3/4"
(45 mm) |
1/2"
(12.7 mm) |
R73-08JN |
1-1/4"
(32 mm)
|
2-1/4"
(57 mm) |
5/8"
(15.9 mm) |
R73-10JN |
1-3/8"
(36 mm)
|
2-1/2"
(64 mm) |
11/16"
(17.5 mm) |
R73-11JN |
1-3/4"
(46 mm)
|
3"
(76 mm) |
7/8"
(22.2 mm) |
R73-14JN |
2-1/2"
(65 mm)
|
4"
(108 mm) |
1-3/16"
(30.2 mm) |
R74-20JN |
|
|
* Rounded Collar Nut
|
|
|
|
|
|
|
|
|
Hardened Washers |
|
|
|
 |
R9F Hardened Washers
for Grade 75 All-Thread Rebar
ASTM F436
Nominal
Bar
Diameter |
Outside
Diameter |
Inside
Diamter |
Part
Number
|
#6 - 3/4"
(20 mm) |
1-3/4"
(45 mm) |
15/16"
(24 mm) |
R9F-07-436 |
#7 - 7/8"
(22 mm) |
2"
(51 mm)
|
1-1/8"
(28 mm)
|
R9F-08-436
|
#8 - 1"
(25 mm) |
2-1/4"
(57 mm)
|
1-1/4"
(32 mm)
|
R9F-09-436
|
#9 - 1-1/8"
(28 mm) |
2-1/4"
(57 mm)
|
1-1/4"
(32 mm)
|
R9F-09-436
|
#10 - 1-1/4"
(32 mm) |
2-1/4"
(57 mm)
|
1-3/8"
(35 mm)
|
R9F-10-436
|
#11 - 1-3/8"
(35 mm) |
3"
(76 mm)
|
1-5/8"
(41 mm)
|
R9F-12-436
|
#14 - 1-3/4"
(45 mm) |
3-3/8"
(86 mm)
|
1-7/8"
(48 mm)
|
R9F-14-436
|
#18 - 2-1/4"
(55 mm) |
4-1/2"
(114 mm)
|
2-5/8"
(67 mm)
|
R9F-20-436
|
#20 - 2-1/2"
(64 mm) |
5"
(127 mm)
|
2-7/8"
(73 mm)
|
R9F-22-436
|
#28 - 3-1/2"
(89 mm) |
7"
(178 mm)
|
3-7/8"
(98 mm)
|
R9F-30-436
|
|
R9F Hardened Washers
for 150 KSI All-Thread-Bar
ASTM F436
Nominal
Bar
Diameter |
Outside
Diameter |
Inside
Diamter |
Part
Number
|
1"
(25 mm) |
2-1/4"
(57 mm) |
1-1/4"
(32 mm) |
R9F-09-436
|
1-1/4"
(32 mm) |
2-3/4'
(70 mm)
|
1-1/2"
(38 mm) |
R9F-11-436
|
1-3/8"
(36 mm) |
3"
(76 mm) |
1-5/8"
(41 mm) |
R9F-12-436
|
1-3/4"
(46 mm) |
3-3/4"
(95 mm) |
2-1/8"
(54 mm) |
R9F-16-436
|
2-1/2"
(65 mm) |
5"
(127 mm)
|
2-7/8"
(73 mm)
|
R9F-22-436
|
3"
(75 mm) |
6"
(152 mm)
|
3-3/8"
(86 mm)
|
R9F-24-436
|
|
|
|
|
|
|
|
|
|
Beveled Washers |
|
|
|
 |
R8M Beveled Washers
for 150 KSI All-Thread-Bar
ASTM A47 or ASTM A536
Nominal
Bar
Diameter |
Degree
of Bevel |
Outside
Diameter |
Inside
Diamter |
Maximum
Thickness |
Minimum
Thickness |
Part
Number
|
1"
(25 mm) |
10° |
2-5/8" sq.
(66.7 mm) |
1-5/16"
(33.3 mm) |
13/16"
(20.6 mm) |
3/8"
(9.5 mm) |
R8M-08-150
|
* 1-1/4"
(32 mm) |
15° |
5-1/4" dia.
(133 mm) |
1-21/32"
(41.9 mm) |
1-41/64"
(41.7 mm) |
19/64"
(7.5 mm) |
R8M-10-150
|
* 1-3/8" *
(36 mm) |
15° |
5-1/4" dia.
(133 mm) |
1-25/32"
(45.2 mm) |
1-41/64"
(41.7 mm) |
19/64"
(7.5 mm) |
R8M-11-150
|
1-3/4" *
(46 mm) |
10° |
5-1/2" dia.
(138 mm) |
2-1/2"
(63.5 mm)
|
1-23/32"
(43.6 mm) |
3/4"
(20 mm) |
R8M-14-150
|
2-1/2"
(65 mm) |
10° |
7-1/2" dia.
(191 mm)
|
3-1/2"
(88.9 mm)
|
2.31"
(58.7 mm)
|
1"
(26 mm)
|
R8M-20-150
|
3"
(75 mm) |
10° |
8" dia.
(203 mm)
|
3-5/8"
(92.1 mm)
|
2.43"
(61.7 mm)
|
1"
(26 mm)
|
R8M-24-150
|
* Additional USS Hardened Washer Required
|
R8M Beveled Washers
for Grade 75 All-Thread Rebar
ASTM A47 or ASTM A536
Nominal
Bar
Diameter |
Degree
of
Bevel |
Outside
Diameter |
Inside
Diamter |
Maximum
Thickness |
Minimum
Thickness |
Part
Number
|
#6 - 3/4"
(20 mm) |
9° |
2" sq.
(50.8 mm) |
1"
(25.4 mm) |
17/32"
(13.5 mm) |
15/64"
(6.1 mm) |
R8M-07 |
#7 - 7/8"
(22 mm) |
9°
|
2"
(50.8 mm)
|
1-3/16"
(30.2 mm)
|
9/16"
(14.3 mm)
|
1/4"
(6.4 mm)
|
R8M-09
|
#8 - 1"
(25 mm) |
15°
|
2-13/16"
(71.4 mm)
|
1-5/16"
(33.3 mm)
|
1"
(25 mm)
|
5/16"
(7.9 mm)
|
R8M-09S
|
#9 - 1-1/8"
(28 mm) |
15°
|
2-13/16"
(71.4 mm)
|
1-5/16"
(33.3 mm)
|
1"
(25 mm)
|
5/16"
(7.9 mm)
|
R8M-09S
|
#10 - 1-1/4"
(32 mm) |
15°
|
3-3/8"
(85.7 mm)
|
1-9/16"
(39.7 mm)
|
1-15/64"
(43.9 mm)
|
3/8"
(9.7 mm)
|
R8M-12S
|
#11 - 1-3/8"
(35 mm) |
15°
|
3-1/2"
(88.9 mm)
|
1-3/4"
(44.5 mm)
|
1-1/4"
(31.8 mm)
|
3/8"
(9.7 mm)
|
R8M-13S
|
#14 - 1-3/4"
(45 mm) |
5°
|
3-9/16"
(90.5 mm)
|
2-1/16"
(52.4 mm)
|
13/16"
(20.6 mm)
|
1/2"
(12.7 mm)
|
R8M-16
|
#18 - 2-1/4"
(55 mm) |
15°
|
5"
(127 mm)
|
3"
(76.2 mm)
|
5/8"
(41.4 mm)
|
19/64"
(7.6 mm)
|
R8M-18
|
#20 - 2-1/2"
(64 mm) |
10°
|
5-1/2"
(140 mm)
|
3"
(76.2 mm)
|
1-23/32"
(43.7 mm)
|
3/4"
(20 mm)
|
R8M-20
|
#28 - 3-1/2"
(89 mm) |
10°
|
8"
(203 mm)
|
4"
(102 mm)
|
2-19/64"
(58.1 mm)
|
7/8"
(22 mm)
|
-
|
|
|
|
|
|
|
|
|
|
Steel Bearing Plates |
|
|
|
|
|
|
|
|
|
|
|
End Caps |
|
|
|
Williams offers end caps produced from fiber reinforced nylon, steel or PVC to provide corrosion protection at otherwise exposed anchor ends. Most often the caps are packed with corrosion inhibiting wax or grease. Caps made from reinforced nylon and steel are used in exposed impact areas. The fiber reinforced nylon end cap meets the Florida DOT standards.
|
|
|
|
 |
 |
 |
 |
 |
| Fiber Reinforced Nylon Cap |
Slip-On PVC Cap
with Plastic Nut |
Screw-On
PVC Cap |
Steel Tube
with Jam Nut |
Steel Tube Welded on Flange with Threaded Screw Connections |
|
|
|
|
|
|
|
|
PVC Centralizer |
|
|
|
 |
The Williams PVC Centralizer is used to center the assembly in the drill hole. They are usually spaced 8 to 10 feet apart along the bar. To order, specify drill hole diameter, bar size or the outer diameter of the sleeve, when used over the bar. |
|
|
|
|
|
|
|
|
Eye Nuts |
|
|
|
Williams Eye Nuts may be used as lifting eyes for forms, concrete blocks, concrete cylinders, machinery or equipment. The large base on three of the models makes them excellent for anchoring guy wires. Safety factors and working loads based on the ultimate strength of the Eye Nuts should be determined for the specific application by the project design engineer. |
|
|
|
 |
 |
 |
 |
 |
 |
 |
| NEB 1 |
NEB 50 |
NEB 75R |
NEB 100 |
NEB 200 |
E1N |
CCF 1-4 |
|
|
|
|
Eye Nut
Designation |
Inside
Width |
Inside
Height |
Ring
Diameter |
Overall
Height |
Taps
Available |
Straight Tension
Ultimate
Strength |
Blank Part
Number |
NEB 1
Ductile Iron |
2"
(51 mm) |
2"
(51 mm) |
1-1/8"
(29 mm) |
5-1/8"
(130 mm) |
3/4"; 7/8"; 1"*
(20; 22; 25 mm) |
35 kips
(156 kN) |
E1M-00-001 |
NEB 50
Ductile Iron |
3"
(76 mm) |
3'
(76 mm) |
1"
(25 mm)
|
5-3/4"
(146 mm)
|
1/2"; 3/4"
(13; 20 mm)
|
26 kips
(116 kN)
|
E1M-00-050
|
NEB 75R
Ductile Iron |
4"
(102 mm)
|
5"
(127 mm)
|
1"
(25 mm)
|
7-3/4"
(197 mm)
|
1/2"; 3/4"
(13; 20 mm)
|
23 kips
(102 kN)
|
E1M-00-75R
|
NEB 100
Ductile Iron |
4"
(102 mm)
|
4-1/2"
(114 mm)
|
1-1/4'
(32 mm)
|
8"
(203 mm)
|
1"; 1-1/4"; 1-3/8"*
(25; 32; 35 mm)
|
65 kips
(289 kN)
|
E1M-00-100
|
NEB 200
Ductile Iron |
5"
(127 mm)
|
6"
(152 mm)
|
2"
(51 mm) |
11"
(274 mm)
|
1-3/8"; 2"
(35; 51 mm)
|
150 kips
(667 kN)
|
E1M-00-200
|
E1N
Malleable |
2"
(51 mm)
|
2-1/2"
(64 mm)
|
7/8"
(22 mm)
|
5-1/8"
(130 mm)
|
Grade 75
#6, #7, #8
|
35 kips
(156 kN)
|
E1M-00-E1N
|
CCF 1
CCF 2
CCF 3
CCF 4
Steel |
up to
4"
(102 mm)
|
up to
6-1/4"
(159 mm)
|
up to
1-1/2"
(38 mm)
|
up to
8-1/2"
(216 mm)
|
Grade 75
#6 through
#18
|
up to
260 kips
(1157 kN)
|
E1M-00-CCF1
E1M-00-CCF2
E1M-00-CCF3
E1M-00-CCF4
|
* 150 KSI All-Thread-Bar may not be used in 1" diameter for the NEB 1 or in 1-3/8" diameter for the NEB 100. |
|
|
|
|
|
|
|
S5Z Wil-X Cement Grout
Conforms to ASTM C845-76 T |
|
|
|
Wil-X is chemically compensated for shrinkage. It has a high bond value and is crack resistant for permanent installations. Because it is a cement-grout, it is non-explosive and has a long shelf life when kept dry.
Wil-X may be used to build up leveling pads by simply mixing with sand or pea gravel. This mixture should not be run through the grout pump.
Setting Time: Gilmore Needles (ASTM C 266). Initial set 45 minutes; final set 10 hours.
Comparative compressive strength test in PSI (modified ASTM C 109)* 3 days in moist air / 4 days in water = 2800 PSI.) Actual strengths as mixed according to Williams instructions range from 6,000 to 9,000 PSI depending on water content.
* Copy of ASTM Modification available upon request. |
|
|
|
 |
Compressive Strength
(70° F Dry Environment)
0.4 w/c Ratio |
| Time |
PSI |
MPa |
| 1 Day |
1,800 |
12.4 |
| 3 Days |
4,000 |
27.5 |
| 7 Days |
6,000 |
41.4 |
|
 |
5 gallon
resealable,
moisture proof,
polyporpylene
pails |
| 94 lbs. bag |
|
|
|
|
|
|
|
|
T3P Heavy Duty Plastic Grout Tube |
|
|
|
Furnished in product lengths
for the anchors or in rolls. |
 |
| O.D. |
I.D. |
Part No. |
3/8"
(9.5 mm) |
1/4"
(6.4 mm) |
T3P03002 |
1/2"
(12.7 mm) |
3/8"
(9.5 mm) |
T3P04003 |
5/8"
(15.9 mm) |
1/2"
(12.7 mm) |
T3P05004 |
3/4"
(19.1 mm) |
5/8"
(15.9 mm) |
T3906005 |
1" Nom.
(25.4 mm) |
3/4" Nom
(19.1 mm) |
T3P06 |
|
|
|
|
|
|
|
|
|
|
Post-Grout Tube
|
 |
Williams will provide post-grout tubes for anchors bonded in weak rock or soil upon request. The Williams supplied flexible post-grout tube has a bursting strength of 1000 psi. The post-grout tube length and valve placement are adjustable and can be specified at the time of order. There is no field assembly of the post grout tube, other than attaching it to the anchor as it is being installed down the drill hole.
|
|
|
|
|
|
|
|
|
Super Plasticizer
|
|
|
|
Plasticizer is available and is used as a water reducer for ease of pumping grout through tubes at lower water to cement ratios. Super Plasticizer can only be used with Wil-X Cement Grout. |
|
|
|
|
|
|
|
S5Z-01 Grout Socks |
|
|
|
What was once considered to be an impossible anchorage is made easy with a practical solution from Williams. We put Grout Socks on our grout bonded anchors for difficult bonding applications such as anchors in weak coral or sandstone, highly fractured rock that can't retain grout, underwater holes in a tidal zone, or holes with artesian flowing water that would normally wash the grout away. The grout sock fabric allows a limited amount of grout through the sock to provide a maximum bond. Also, since the socks are individually manufactured to allow twice the amount of grout as your drill hole volume, the grout completely fills the hole under pressure while sealing up adjacent cracks and voids in the rock. This creates a mechanical lock between the anchor grout column and the rough drill hole surface. |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
 Williams Form Engineering Corp. All rights reserved. |
|
